Turning Spindles – A Guide

Turning Spindle Turning is an art, and as such, there are a number of rules of thumb that you will need to be aware of when using this technique. The turning of a spindle is not as difficult as you may think, but it requires a certain degree of skill on your part.

Turning Spindle

Spindle turning, also known as turning at the center, is a commonly woodturning method referred to as an “inside out turning technique.” In turning spindles you will be turning a flat wooden workpiece on its side and in some cases an object such as a door or piece of furniture. Turning spindles are very popular in craftsman circles and can be seen in most woodworking shops. A turner does not have to have a professional level of skill, but if you are just starting out in woodturning, it may be advisable to hire a turner and get the basics down before attempting anything more complex.

Turning spindles can be used for any sort of woodturning, be it a fine art piece or a simple hobby project. Turning a spindle can take several hours of practice and patience, especially if you have no prior experience with turning woodturning. If you are serious about learning how to turn a spindle, you will need to get yourself a basic manual on turning a spindle and spend time practicing on a piece of scrap wood before you attempt turning a real thing.

Before beginning, you should read all the instructions and safety precautions on the manual provided by the turner, before you start and never work on any piece of metal or glass while wearing welding or arc protection gear. For those who do choose to use welding equipment, they should wear safety glasses when working with the spindle, especially when you are turning a thin piece of plywood.

The most important rule to remember when turning wood, is to have the pieces of wood laying flat on their sides, not touching each other or the walls of your turner, which may be necessary in some situations. If you have not turned wood for quite some time and you find that you are having trouble getting your pieces of wood flat, you may want to try using a piece of plywood as a guide, until you are comfortable with using the wood turner and have a consistent angle. your woodturner. {or lathe. Never put wood directly on the turner, the wood will not turn. {or lathe. Instead, you should always hold the piece of wood by its edges to ensure it is flat and in a straight position on the turner.